Use of non-destructive test methods on Irish hardwood standing trees and small-diameter round timber for prediction of mechanical properties

Key message

Mechanical properties of small-diameter round timber from hardwood thinnings of common alder ( Alnus glutinosa (L.) Gaertn.), European ash ( Fraxinus excelsior L.), European birch ( Betula pendula Roth. and Betula pubescens Ehrh.), and sycamore ( Acer pseudoplatanus L.) can be evaluated by non-destructive testing on either standing trees or green logs without wood density determination. Velocity differences between acoustic and resonance methods are influenced by tree species and age. Tree diameter improves the estimation of bending strength but not of stiffness.

Abstract

Context There is a need for a reliable, fast, and inexpensive evaluation method to better sort hardwood thinnings according to mechanical properties for use in potential added-value applications.
Aims The estimation by non-destructive testing of mechanical properties of round small-diameter timber of four hardwood species (common alder, European ash, European birch, and sycamore).
Methods Acoustic velocity was measured in 38 standing trees and resonance velocity was recorded in green logs from these trees. The logs were then dried and tested in bending. Estimation models to predict mechanical properties from non-destructive testing measurements were developed.
Results Large differences between velocities from acoustic and resonance techniques were found. Models based on both non-destructive testing velocities together with a species factor are well correlated with bending modulus of elasticity while models including tree diameter are moderately well correlated with bending strength. Inclusion of density in the models does not improve the estimation.
Conclusion Models based on acoustic measurements on standing trees or resonance on green logs together with tree species and diameter provide reliable estimates of mechanical properties of round timber from hardwood thinnings. This methodology can be easily used for pre-sorting material in the forest.

Keywords
Bending strength, Broadleaf thinning, Longitudinal frequency, Modulus of elasticity, Stress waves, Wind effect

Publication
Llana, D.F., Short, I. & Harte, A.M. Use of non-destructive test methods on Irish hardwood standing trees and small-diameter round timber for prediction of mechanical properties. Annals of Forest Science 77, 62 (2020). https://doi.org/10.1007/s13595-020-00957-x

For the read-only version of the full text:
https://rdcu.be/b47GW

Data availability
The datasets generated during the current study are available from the corresponding author on reasonable request.

Handling Editor
Jean-Michel Leban

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.